Steering

"T" COLUMN DROP
CCR offers an aluminum column drop that has a 1 3/4" diameter hole for use with CCR's steering columns. 2 1/2" Limeworks or Flaming River Columns.

   
71238 • "T" Column Drop, (long body) $59.95
71246 • "T" Column Drop, (standard body) $59.95
71238C • "T" Column Drop, Chrome (long body) $79.95
71246C • "T" Column Drop, Chrome (standard body) $79.95



TILT STEERING COLUMN
CCR's new small diameter tilt steering column adds the ultimate comfort and adjustability to your 'T'--suddenly you can fit into your car with your legs out of the way of your hands and the steering wheel. Our columns come in polished stainless steel or paintable steel (plain), and they are the correct length for your "T.

The kit comes with a stainless tilt column, knobs and levers (tilt, turn signal, flasher), chrome column drop with mount plate and hardware, firewall mount bracket and sleeve, and a custom adjustable box coupler. (steering wheel and adapter sold separately). Note: this kit works very nice as a retro-fit to a CCR (or others) standard column mass with very little modification.
70254 • "T" Tilt Column Kit (mill stainless finish) 25" std. body kit $639.95
70257 • "T" Tilt Column Kit (polished stainless) 28" kit $479.95
79227 • Tilt Column only (mill stainless) 28" $359.95
79227P • Tilt Column only (polished stainless) $529.95

STEERING NUT
Our polished solid brass steering wheel nuts bolt on to our steering adapter, or a stock 'T' steering shaft.

71230P • Brass Nut ............................................................................................. $7.95
71230C • Chrome Nut ......................................................................................... $9.50
   
KEYED "T" STEERING ADAPTER
Adapts wood "T" steering wheels to existing steering shafts.
Must be welded to shaft.

71240 • Steering Shaft Adapter $34.95



STEERING SHAFT
Made for CCR's steering columns, shafts are splined at bottom to fit corvair steering box and keyed at top to accept 'T' wood steering wheel. It can be splined at top to accept GM adapter with coupler at bottom to fit the Corvair steering box.
Welded Shafts .....(specify length)  
91728 • Special Order Shaft $159.95
(allow 2 weeks for delivery)  
   

LE CARRA STEERING WHEEL
Le Carra makes one of the most popular steering wheels. Aluminum center section with leather outer covering makes for a comfortable drive. Please specify color when ordering
79236 • Le Carra Wheel $179.95
   
79244 • Steering Wheel Adapter $99.95
(polished billet aluminum, 9 bolt)  
   
79245 • Horn Button $61.95
(polished billet aluminum)  
79247 *Steering Wheel Adapter $99.95
(polished billet aluminum, 5 bolt)  
79215 * 14" 4-Spoke Flat Leather Grip - 3 bolt (black) $175.95
   





COMPLETE POLISHED REVERSED
CORVAIR STEERING BOX

CCR eliminates your hassles of having to deal with chrome and polish shops when you use our custom plated and polished, complete reversed corvair steering box. This unit comes complete with custom polished, reversed and rebuilt box, chrome steering arm, chrome nut.

31550P • Complete Reversed Steering Box, Polished .
...............Original Aluminum....... $675.00



FAD "T" REVERSED CORVAIR STEERING BOX
The reversed Corvair steering box is perfect for "T"s because of its clean appearance and function. It's recommended for cars under 2000 pounds. We disassemble, clean, and inspect the box, replace worn bearings, and do all necessary machining to reverse the box, then reassemble it and adjust it, so you just bolt on and drive.

31515 • Reversed Steering Box Only (new steel) $429.95
31515P • Reversed Steering Box Only, Polished (original aluminum) $640.00
If you have a corvair box already, CCR can reverse and rebuild it for you.  
Labor • Labor to reverse and rebuild your Corvair Box (parts are extra) $85.00
   
31515C • Reversed new steel Bx Chromed, Flaming River $759.95
31515TEC • New Machined Chromed, Flaming River $995.00


CORVAIR STEERING BOX PARTS
Everything you need to rebuild your Corvair steering box. Plug fills the hole at the bottom after reversing, the seals are used where the spline arm comes out for the steering arm.

31523 • Plug for Corvair Box ea $2.50
57506 • Corvair Seal (output shaft) ea $7.50
57501U • Bearings (2 needed) - good used only ea $20.00
57505 • Corvair Seal (input shaft) ea $7.95
31522 • Machined Lid with Seal with exchange $44.95
Polished add $10.00
57502 • Bronze Bushing (for output shaft) ea $8.95
Corvair Shaft (specify top and bottom adapters being used.) ea $165.00



CORVAIR STEERING BOX BRACKET
CCR's Corvair box bracket welds on the inside and top of your frame, and allows your box to be bolted at the correct angle. Bracket welds to inside of frame and box will mount on top of frame.
21702 • Corvair Box Bracket (standard body) ea $37.95
21704 • Corvair Box Bracket (long body) ea $37.95
   



CORVAIR PITMAN ARM
Locates at any angle on the splined shaft.
   
31510 • Corvair Pitman Arm $72.95
31510C • Chrome Corvair Arm $99.95
31513 • Chrome Pitman Arm Nu $3.00
31513C • Chrome Pitman Arm Nut $4.95
   


ORIGINAL CORVAIR COUPLER
Original coupler has 2 bolts to clamp to shaft. This original part has limited availability, please call.
91707 • Corvair Coupler, stock $37.95
91707C • Corvair Coupler, chrome $49.95


CUSTOM CORVAIR COUPLER

This small, 5/8 x 36 splined coupler should be used with stock type, or new, corvair shafts (must be welded to shaft).

91708 • Custom Corvair C......................................................... $39.95


UNIVERSAL JOINTS
Possibly the finest! CCR carries a whole line of sizes. Call now and we'll get you what you need! Borgeson & Flaming River available.
U-Joints .....................................................................


99722 • Slim Profile 5/8 - 36 x 3/4 - 36 $71.95
99723 • Billet 5/8 - 36 x 3/4 - 36 $74.95
99727 • Billet 5/8 - 36 x 1" DD $74.95
99729 • Billet 5/8 - 36 x 3/4 DD $74.95
Polished Billet Universal add $20.00