Brake Kits


Front & Rear Disc Brake Kits
Heavy duty brake kits feature '37-'48 Ford spindle, vented rotor (.812" thick), 4-piston Wildwood calper and billet hubs. Front brake kits have a multi-lug (5-lug, 4.5/4.75") bolt calipers and anodized brackets. Rear Polished Kits feature polished calipers and anodized brackets. Front polished kits feature polished calipers, machine finished hubs, and anodized brackets.
40208 • Front Disc Kit (Polished) $799.95
40210 • Front Disc Kit (Polished with drilled rotor) $889.95
40212 • Front Disc Kit (Polished with 360 degree bracket) $899.95
40266 • Front Disc Econo GM Calipers w/1" Vented Rotors 4.5 BP $425.95
40267 • Front Disc Econo GM Calipers w/1" Vented Rotors 4.75 BP $425.95
40262 • Front Adapter Kit (inc. Caliper Brackets, Bearing, Seal Kit) $165.95



Rear Disc Brake Kits with E-Brake

These rear disc brake kits are for 9" Ford rearends and include an internal drum emergency parking brake. Rear Polished Kits feature polished calipers and anodized brackets.

40230 • Explorer Rear Brake (with internal drum emergency parking brake) $499.95
40231 • Explorer Rear Brake (with drilled rotor and internal drum e-brake) $599.95
40233 • Wildwood rear brake (Polished caliper with internal drum e-brake) $759.95
40235 • Wildwood rear brake (Polished caliper with e-brake and driled rortor) $899.95



Rear Drum Brake

40248 • Rear Drum Kit -- (9" Ford, 10' Diameter) pr. $425.95
40249 • Rear Drum Kit -- (9" Ford, 11" Diameter) pr. $425.95




Throttle & Brake Parts


GAS PEDAL-SPOON STYLE
Make driving easier with this stylish and popular spoon shaped gas pedal assembly. With its splined shaft, adjusting for your driving comfort is no problem. Pedal assembly also includes teflon bushing for long wear. Assembly works well with all throttle cables. Available chrome plated or in stainless steel.
79609 • Gas Pedal, Spoon, chrome $49.95
79614 • Gas Pedal, Chrome $89.95
(w/ rubber insert)  



EMERGENCY BRAKE HANDLES
The Lo-Line emergency brake is polished stainless steel and mounts to your floor. You can also get a transmission mount E-Brake that comes up through your floor.

49700 • Lo-Line E-Brake, S/S $124.95
49701 • Trans. Mnt. E-Brake, S/S $129.95
(11" handle)  


EMERGENCY BRAKE CABLE KITS
CCR has the cables to go with your E-Brake handle. Specify which handle you have and if you are using disc or drum brakes.

49721 • E-Brake Cable Kits (UN-2) $129.95



GAS PEDAL-BILLET ALUMINUM
CCR offers you the best billet aluminum gas pedal assembly available. Splined so it is fully adjustable and spring loaded so it fits any angle of your foot. It makes driving more comfortable! Works well with all throttle cables.

79611 • Gas Pedal Assembly, Billet $135.95
79614 • Pedal assy, Chrome w/rubber $89.95


THROTTLE CABLE-HI-TECH
One of the hottest items available. These trick, braided stainless steel, teflon lined throttle cables come with all aluminum fittings. Works great on all carburetors. Comes 26" long and you can cut it to any length that you need.

99001 • Throttle Cable, S/S $44.95
99005 • Return Spring & Brkt., S/S $28.95
(stainless steel bracket & dual spring)  


KICKDOWN CABLE-HI-TECH
If you're going for that aluminum, hi-tech look, you'll want this braided kick down cable made by Lokar. These kickdown cables will match the braided throttle cable and dipsticks.

99100 • Kick Down Cable, S/S $76.95
(fits 350 Chevy, others can be special ordered)  


DIPSTICKS-HI-TECH
Compliment your car with a hi-tech, braided stainless steel dipstick. Two models are available to fit all your needs: a firewall mount, and a shorter transmission mounted dipstick.

99124 • Dipstick, firewall mount $89.95
(fits 350/400 Chevy)  
99126 • Dipstick, trans. mount $81.95
(fits 350 Chevy)  



BRAKE PEDAL PADS
You can get your billet aluminum brake pedal pad at CCR. A perfect match for the billet gas pedal assembly.The bolt-on brake pedal pads have a rubber insert and are available in round and rectangular shapes (round shown).

79600 • Round Pad, S/S ea $32.95
79605 • Rectang. Pad, chrome ea $39.95
(chrome pedal with rubber insert)  
79601 • Rectang. Pad, Billet ea $41.95
79603 • Rectang. Pad, Billet ea $41.95
(Billet pedal with rubber insert)  


SHIFT LINKAGE-VARI-ANGLE
This variable angled shift linkage from Kugel adapts any column or floor shifter without the common linkage problems you can encounter. Its unique spline steel insert allows it to be used at any angle with any shifter. Available in lengths: 12" rod and 18" rod. Both lengths can be shortened to fit your needs. Kit comes with the shift arm, rod, and hardware.

99187 • Shift Linkage, 18" rod $49.95
99190 • Shift Linkage, 12" rod $49.95

FOOT REST PEGS
These foot rest pegs mount on your floor, next to the throttle, and give you that needed foot support on long trips. You don't need to hold up your foot anymore, just rest it on this foot rest.
79615 • Foot Rest $9.95



Brake Lines & Fittings

Flex Lines
49613 Flex 13" S/S Braided Ln pr $29.95
#3 AN - #3 AN (A & T Rear)  
49615 • Flex 15" S/S Braided Ln pr $31.95
#3 AN - #3 AN (A & T Rear)  
49618 Flex 18" S/S Braided Ln pr $32.95
#3 AN - #3 AN (A Front. & T Rear)  
49620 Flex 20" S/S Braided Ln pr $32.95
#3 AN - #3 AN (T Front)  
49626 Flex 15" S/S Braided Ln pr $44.95
#3 AN - #3 AN 45 (A - 34 Rear)  
49628. 18" S/S Braided Line pr $38.95
#3 AN - 3/8 banjo (A - 34 Front)  
49630. 18" S/S Braided Line pr $38.95
#3 AN - 10mm banjo (A - 34 Front)  
49632. 20" S/S Braided Line pr $39.95
#3 AN -10mm banjo (T Front)  
49634. 18" S/S Braided Line pr $39.95
#3 AN - 7/16 banjo (A - 34 Front)  


Banjo Bolts

49135.. 3/8-24 Banjo Bolt $4.95
Early Mustang caliper  
49136.. 10MM X 1.50 Banjo Bolt $4.95
1978-Up GM mid caliper  
49137.. 7/16-20 Banjo Bolt $4.95
Early Ford front '77-down caliper  
49138. .7/16-24 Banjo Bolt $4.95
Mustang 11, Pinto, Lincoln Versaille  
49139.. 10 mm Crush Washer (2) $.50
Use w/3/8 &10 mm banjo bolt  
49140. .7/16 Crush Washer (2) $.50
Use w/ 7/16 banjo bolt  


* Note: All brake parts are priced individually (each) unless otherwise specified.

Tabs, Clip & Clamps

49303 • Line Tab (Weld On) ea $2.00
49305 • Line Tab, S/S (Bolt On) ea $3.95
49307 • Brake Line Clips $1.50
Use with tubing adapters  
49315 • 3/16 Line Clamp, S/S ....(12) $17.95
1 piece with screws  
49316 • 1/4 Line Clamps, S/S ...(12) $17.95
1 piece with screws  
49317 • 5/16 Line Clamps, S/S ..(12) $17.95
1 piece with screws  
49318 • 3/8 Line Clamp, S/S (12) $17.95
1 piece with screws  
49319 • 3/16-3/8 Ln. Clamp, S/S .(6) $17.95
1 piece with screws  
49324 • 3/16 Line Clamp, Nylon ....(6) $7.50
1 piece with screws  
49326 • 3/8 Line Clamp, Nylon (6) $7.50
1 piece with screws  
49304 • AN Line Tab ea $2.00
Stamped weld-on tabs  
49306 • AN Line Tab ea $4.35
Stamped bolt-on tab  


Inverted Fittings

49000 • 3/16 INV. - 3/16 INV ea $2.20
Coupler  
49001 • 3/16 INV. ENDS ea $1.20
Hardline ends (short)  
49002 • 3/16 INV. T (Brass T) ea $6.95
49009 • 3/16 INV. T - On Run ea $8.90
Splits ends at adapter  
49011 • 3/16 INV. - 3/16 INV ea $5.95
Male to male adapter at ends  
49013 • 3/16 INV. -1/4 INV ea $3.95
For Kelsy Hayes proportioning valve  



Inverted Fittings Adapters & Pipes

49004 • 3/16 INV. T w/1/8 Pipe $7.95
Mounts T stoplight switch  
49006 • 3/16 INV. -1/8 Pipe $5.50
Proportioning valve, booster, I" M/C adapter  
49007 • 3/16 INV.-1/8 Pipe 90 Adapter $4.95
49015 • 3/16 INV. -1/2-20 $5.95
Dual M/C Ford & Chevy, and small booster  
49016 • 3/16 INV - 9/16-18 $5.95
Dual M/C Chevy  
49019 • 1/8 Pipe T $7.25
49021 • 1/8--Pipe T - ON RUN $7.25
Adapts stop light switch (1 male, 2 female)  
49023 • 1/8 Pipe-1/4 INV. (Prop. Valve) $3.50
49024 • 1/8 Pipe Female -1/8 Pipe $3.95
Coupler (female - female)  
49026 • 1/8 Pipe Tube $3.50
Male - male (oil sender)  
49028 • 1/8 Pipe Female 45 $10.95
Female - male 45' (oil sender)  
49030 • 1/8 Pipe -1/4 Pipe $5.25
Adapt stop to booster  
49032 • 1/4 T (Brass) $8.95


AN Adapter Fittings & AN To Pipe Fittings
49102 • 1/8" Pipe - #3 AN 45 $8.95
Caliper (Wilwood and Airheart)  
49103 • 1/8" Pipe - #3 AN 90 $8.95
Caliper (Wilwood and Airheart)  
49115 • #3 ANT w/1/8" Pipe $10.50
Thru-frame adapter and split  
49101 • 1/8" Pipe - #3 AN 0 $4.25
Prop. valve, booster, M/C (Wilwood or Airheart)  


Thru-Frame Fittings
Our thru-frame fittings make running your brake lines easy and give your car a clean, well-built look when finished. S/S fittings are polished.
49308 • Thru-Frame 1/8-1/8, 2" pr $44.95
49309 • Thru-Frame 1/8-1/8, 21/4" pr $44.95
49311 • Thru-Frame 1/8 - #3 AN, 2" pr $45.95
49312 • Thru-Frm. 1/8-#3 AN-21/4" pr $45.95

Adapters Inverted To AN
49119 • 3/16 INV. - #3 AN $5.95
Ford and early Chevy wheel  
49120 • 3/16 INV. Female - #3 AN $7.45
Tubing adapter, use with tab  
49121 • 10MM - #3 AN $4.95
Volkswagen type Ill & IV  
49122.7/16-20 (1/4 INV) -#3 AN $5.95
Early Ford front '77 & down caliper  
49123 • 1/4 INV. Female - #3 AN $6.95
Tubing adapter 1/4, use with tab  
49125 • 7/16-24 - #3 AN $9.95
Mustang, Lincoln Versaille, early Ford rear  
49127 • 1/2-20 - #3 AN $6.50
Ford dual M/C, Chevy dual M/C  
49128 • 9/16-18 - #3 AN $6.95
Chevy disc/disc M/C  


AN Fittings

49106 • Bulk #3 AN - #3 AN 0 $7.50
Fixed fitting use with tab  
49107 • Bulk #3 AN - #3 AN 45 $12.50
Fixed fitting use with tab  
49109 • Bulk K #3 AN - #3 AN 90 $12.50
Fixed fitting use with tab  
49111 • Bulk #3 AN T $16.95
Fixed fitting use with tab  
49112 •3/8-24 Bulkhead Nut $2.25
49116 • #3 AN T $10.50
49130 • #4 AN - #3 AN Adapter $7.95
49142 • #3 AN Nut S/S Line End $2.75
49143 • #3 AN Sleeve S/S Line End $2.10
49145 • #3 AN - #3 AN Coupler $5.50
49147 • #6 AN Nut S/S Line End $3.50
49149 • #6 AN Sleeve S/S Line End $2.50



Adjustable Proportioning Valve
This proportioning valve from Wilwood measures just over 4" in length and 3" wide with the fittings. It is adjustable to easily dial-in the right amount of pressure for your disc brakes.
49516 • Adjustable Prop. Valve - Wilwood $69.95
49517 • 2# Residual Check Valve - Disc brakes $23.95
49518 • 10# Residual Check Valve - Drum brakes $23.95
49018 • 1/8 Pipe -1/8 Pipe $2.35
Proportioning valve to residual valve  




Stop Light Switches & Fittings
49500 • Stop Light Switch $9.95
Low-pressure, push on  
49502 • Stop Light Switch $19.95
Low-pressure, slide on  
49503 • Relay for Stop Switch $41.95
49504 • Wire Connector, Push On $.75


Hard Lines

49605 • 3/16 Inv. Steel Line $8.50
3/16 X 60" with ends  
49610 • 3/16 Jag Steel Line $10.95
3/16 X 30" with ends (bubble flare)  
49600 • 3/16 S/S Tube ea foot $5.95
10' lengths  


Power Boosters
Are you using both feet to stop your car? You need a power booster. The booster multiplies the line pressure to make stopping easier.
49425 • Booster w/Dual Mstr. Cyl $169.95
Power Booster w/Dual Master Cylinder Unit  
29750 • Power Booster Bkt. Kit $139.95
Booster bkt., pedal bkt. and push rod for CCR  
29730 • Frame Brk. for Master Cyl. / Booster unit $39.95

Master Cylinders

49412 • 1 " Dual Master Cylinder $79.95
Disc-drum Ford  
49414 • 1" Dual Master Cylinder $99.95
Disc-disc Chevy - Ports both sides  
89106 • MC Cover for Access thru Floor $19.95



29738 - Pedal Bracket Only (POWER) $37.95
 
29730 • Bracket for Combo Master Cylinder / Booster $39.95
47427 • Booster only - Single Diaphram $79.95
49429 • Booster only - Dual Diaphram (Jag) $89.95